Tellabs 8820 MSR, Установка системы

Страница: 41 / 88

Tellabs 8820 Multi-service Switch Router System Installation 4-1
CHAPTER 4
Installation
This chapter describes how to set up 8820 MSR hardware,
connect power and network cabling, power up, and set initial
configuration parameters, in the following sections.
❑
Install the 8820 MSR, on page 4-3
❑
Connect Power, on page 4-8
❑
Load the Chassis (Optional), on page 4-11
❑ Connect 8820 MSR Alarm Outputs, on page 4-14
❑ Connect the Local Console to the 8820 MSR, on page 4-15
❑ Apply and Verify Power, on page 4-16
❑ System Boot Up, on page 4-17
❑ Log Into the 8820 MSR Console Interface, on page 4-17
❑ Change the Default Password, on page 4-18
❑ Set a Static Route, on page 4-20
❑ Connect the Ethernet (IP Management) Port, on page 4-20