manualshive.com logo in svg

Tellabs 8820 MSR, Установка системы


Поделиться
Скачать
background image

FCC Notification 
Statement

Federal Communications Commission (FCC) Rules require that you be notified 
of the following:

This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference when the 
equipment is operated in a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to 
cause harmful interference in which case the user will be required to correct the 
interference at his own expense. 

Changes or modifications not expressly approved by Tellabs Operations, Inc., in 
writing can void the user’s authority to operate the equipment. 

Industry Canada 
Notification Statement

Industry Canada interference-causing equipment regulations require that you be 
notified of the following: 

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du 
Canada. 

Copyright Statement

This Tellabs manual is owned by Tellabs or its licensors and protected by U.S. 
and international copyright laws, conventions, and treaties. Your right to use this 
manual is subject to limitations and restrictions imposed by applicable licenses 
and copyright laws. Unauthorized reproduction, modification, distribution, display 
or other use of this manual may result in criminal and civil penalties.

Trademark Notice

The following trademarks and service marks are owned by Tellabs Operations, 
Inc., or its affiliates in the United States and/or other countries: AUDIO PLUS

®

, 

CABLESPAN

®

, CEC-128

™

, DYNAMIC SIGNAL TRANSFER

™

, DXX

®

, 

DXX logo

®

, EC DUO

®

, ENHANCED AUDIO PLUS

®

, EXPRESS/PATH

®

, 

FOCUS

™

, MARTIS

®

, MARTISDXX

®

, MARTIS logo

®

, MARTISDXX logo

®

, 

METROVANTAGE

™

,

 

METROWATCH

™

, NETREACH

®

, NETWISE

®

, 

SCULPTURED SOUND

™

, TELLABS

®

, TELLABS and T symbol

®

, T symbol, 

TELLABS PROPARTNER

™

, TEL/MAP

™

, TEL/MOR

®

, THE WORLD 

COMMUNICATES THROUGH TELLABS

™

, TITAN

®

, VERITY

™

, YOUR 

NETWORKING PARTNER

®

.

Any other company or product names may be trademarks of their respective 
companies.

Contact Information 

In an effort to improve the quality of this document, please notify Tellabs 
Technical Assistance at 1.800.443.5555 in North America or 1.630.378.1192 
outside North America if any anomalous conditions are observed. 

Содержание 8820 MSR

























































































Отзывы:

Нет отзывов

Похожие инструкции для 8820 MSR

ABB i-bus KNX IPR/S 3.5.1 Product Manual preview
i-bus KNX IPR/S 3.5.1
Бренд: ABB Страницы: 44
D-Link DES-7200 User Manual preview
DES-7200
Бренд: D-Link Страницы: 100
D-Link DES-3226L Manual preview
DES-3226L
Бренд: D-Link Страницы: 134
D-Link DES-3010F Command Line Interface Manual preview
DES-3010F
Бренд: D-Link Страницы: 187
D-Link DES-3010F Manual preview
DES-3010F
Бренд: D-Link Страницы: 225
D-Link DES-1048G Manual preview
DES-1048G
Бренд: D-Link Страницы: 31
D-Link DES-1050G User Manual preview
DES-1050G
Бренд: D-Link Страницы: 35
D-Link DES-1016D - Switch Quick Install Manual preview
DES-1016D - Switch
Бренд: D-Link Страницы: 19
D-Link COVR-2202 User Manual preview
COVR-2202
Бренд: D-Link Страницы: 107
D-Link AirPlusXtremeG DI-624 Troubleshooting preview
AirPlusXtremeG DI-624
Бренд: D-Link Страницы: 5
D-Link DGS-1210-28P Getting Started Manual preview
DGS-1210-28P
Бренд: D-Link Страницы: 48
D-Link DSL-2730B Technical Support preview
DSL-2730B
Бренд: D-Link Страницы: 5
D-Link GO-SW-5E Quick Install Manual preview
GO-SW-5E
Бренд: D-Link Страницы: 2
NEC N8104-128 Installation Manual preview
N8104-128
Бренд: NEC Страницы: 47
8e6 Technologies Enterprise Filter Authentication R3000 Quick Start Manual preview
Enterprise Filter Authentication R3000
Бренд: 8e6 Technologies Страницы: 66
VAF instruments 667 Instructions For Installation, Operation And Maintenance preview
667
Бренд: VAF instruments Страницы: 56
Palm M505 Setting Up preview
M505
Бренд: Palm Страницы: 4
Harman Kardon CITATION 7.0 Owner'S Manual preview
CITATION 7.0
Бренд: Harman Kardon Страницы: 66

Бренды по названию

Популярные бренды

Загрузить еще бренды