Tellabs 8820 MSR, Установка системы

Страница: 19 / 88

Unpacking the 8820 MSR
Uncrate and Inspect
Unpacking and Site Preparation
2-3
PN 76.8820IM30-A Tellabs 8820 Multi-service Switch Router System Installation
Uncrate and Inspect
This section describes how to remove the equipment from the shipping container, and
determine that you have received all expected equipment.
❑ 8820 MSR Crate Inspection and Disassembly, on page 2-3
❑ Accessory Box Inspection, on page 2-5
❑ Inspect the Physical Line Modules (Optional), on page 2-5
8820 MSR Crate Inspection and Disassembly
When unpacking the 8820 MSR, you will first disassemble the wood crate, then remove the
chassis and accessory box from its internal cardboard carton and plastic wrap.
Step 1
Remove the packing list from the plastic envelope mounted on the outside of the
shipping crate. Use this paperwork to validate the contents after the shipping
containers are removed.
Step 2
Disassemble the wood crate.
a
Unlock each of the six cam locks located around the perimeter of the crate. Pull
the front and top panel away from the crate
(Figure 2-1)
.
Figure 2-1 8820 MSR Open Crate
a.
Carefully lift the 8820 MSR cardboard carton out of the wood crate.