TeleEye GN8916/GN8932/GN8816/GN8616 User Guide Page 78
[Main Menu] → [Event Handler] → [VA/Motion] → [Advance se ng] → [Mo on]
Select
Select motion blocks
Deselect
Deselect motion blocks
Select All
Select all motion blocks
Deselect All
Deselect all motion blocks
Sensitivity
Set the sensitivity level
Area
Set the area sensitivity (Custom sensitivity only)
Level
Set the light sensitivity
(Custom sensitivity only)
OK
Save the motion detection settings
5.4.3.5.Video Loss
Video loss event is triggered when the video channel input disappears, or when the digital video
recorder receives no signal from the camera. When this happens, a blue screen is displayed on the
local monitor.
[Main Menu] → [Event Handler] → [Video Loss]
Camera
Select a camera
Enable
Enable / disable video loss event
Action
Set actions taken when video loss is detected
5.4.3.6.System Tamper
A tamper switch can be wired to a digital video recorder and its accessories outside its cabinet. In
an emergency (e.g. someone breaking and entering), the digital video recorder will inform staffs in
regards to the event and may trigger alarms.
