TeleEye GN8916/GN8932/GN8816/GN8616 User Guide Page 60
5.3.2. Recording
For different situations, TeleEye GN8 supports 3 recording modes: manual recording, schedule
recording and event recording. When a camera is recording, the icon
will be shown next to its
name and the LED
will light up in red.
•
Manual Recording
The start/stop operation is controlled manually by an
operator. Recording will be performed on all cameras
once started. When manual recording is on, schedule
recording will be disabled.
•
Schedule Recording
Recording will be started and stopped according to user-
defined schedules. Schedules are set on a weekly basis.
When scheduled recording is enabled, manual recording
will be disabled.
•
Event Recording
Event recording will be activated if an event is triggered
with its recording action enabled. It can be performed
with manual recording or scheduled recording
simultaneously. Detail description and setup procedure
will be given later in the Advanced Operation section.
To change recording mode quickly, right click the mouse to open
[Screen Selection]
and click
[Recording]
.
Recording
Quick menu for selecting recording mode
•
Off :Disable recording
•
On :Enable recording of all cameras
•
Schedule:Enable schedule recording
To change other recording settings or edit recording schedules, go to the following menu:
