TeleEye GN8916/GN8932/GN8816/GN8616 User Guide Page 68
5.4.2. Circuit Detection
TeleEye GN8 supports two types of circuit detection on all alarm inputs including arm/disarm
input, security switch input, system tamper and power failure input.
NC/NO
: Select circuit open/close as system
5.4.3. Event Handling
TeleEye GN8 HD Digital Video Recorder supports 9 types of event detection and their icons are as
follow.
Event Icons in Local Monitor
If an event is triggerd, its respective icon will be flashing next to the camera name (for motion,
video loss) or at the bottom of the screen (for all other event types). If an event has reset and the
event status is not yet cleared, the icon will remain static in its original position.
5.4.3.1.Arm/Disarm
Arm/Disarm input is used to enhance the security level of surveillance areas. There are 3 zones to
choose from: fire zone, normal and entry/exit zone.
Armed
If the system is armed, alarm sensors that are set as a normal zone alarm are triggered
immediately if someone triggers the sensor or if motion is detected. It is usually used when no
operator is in the surveillance area.
