TeleEye GN8916/GN8932/GN8816/GN8616 User Guide Page 72
•
On State
If on state is set to
'close'
, security switch of TeleEye GN8 will be set to
'on'
if the circuit is
closed
. If
the circuit is
open
, the security switch of TeleEye GN8 will be set to
off
. Contrary, if on state is set
to
'open'
, security switch of TeleEye GN8 will be set to
'on'
if the circuit is
open
. If the circuit is
closed
, the security switch of TeleEye GN8 will be set to
off
.
•
Physical Configuration for Security Switch
The security switch input and ground of TeleEye GN8 digital video recorder have to connect to a
control circuit which is usually the lock of the surveillance area for security switch input.
[Main Menu] → [Event Handler] → [Security Switch]
5.4.3.3.Alarm
It is an input to the digital video recorder from external alarm sensors. Alarm can be used to detect
events that occur in the surveillance area, such as fire and trespassing. Alarm event supports BS
8418:2003 which has arm/disarm and security switch functions.
•
Zone Type
All alarm sensors can be associated with zone types if Arm/Disarm input is installed.
Normal Zone
Alarms can triggered if the system is armed.
Fire Zone
Alarms can triggered in both arm state, i.e. armed or disarmed.
It is suitable for fire detectors
Entry/Exit Zone
Allows user to set the delay time for entering or leaving the
surveillance area without triggering any alarm event. If alarm
recording action is enabled, recording starts at entry or exit
time throughout the delay.
