Operator’s Manual Simple AFG Application
69
Note:
T
he High Limit doesn’t force
setting voltages under the limit, but during the
generation the part of the waveform that exceeds the limit will be cut at the High
Limit.
Low Limit [V]
Sets the minimum voltage that the channel generates. This limit is verified during
the generation, but it doesn’t take care about the
Baseline Offset.
The constraint Low Limit < High Limit must be met.
This feature can be used to ensure the load is not damaged.
Note:
T
he Low Limit doesn’t force
setting voltages under the limit, but during the
generation the part of the waveform that exceeds the limit will be cut at the Low
Limit.
Output
Impedance
[Ohm]
Sets the output instrument impedance to low (5 Ohm) or to 50 Ohm.
Settings button
Touch the “Settings”
button to open the dedicated
Main Setting Tabs
page relative to the,
Clock
Settings
,
Trigger Settings
and
Marker Settings
tab.
