Teledyne Everywhereyoulook T3PM1100, Руководство пользователя, Страница: 210 / 227

T3PM1100 User Manual
210
The extended event register receives information about changes in the
condition register, which indicates the instrument’s internal condition.
The information is the result of edge detection performed by the
transition filter.
The following table lists the bit definitions for the condition register:
Bit Name Decimal Definition
0 Updating 1 The measured data is being
updated. UPD changing from 1 to
0 indicates that updating has been
completed.
1 Integrate Busy 2 During integration.
2 Integrate Time Busy 4 The integration timer is operating.
3 Not Used 8 (Reserved for future use)
4 Frequency Over 16 The frequency is outside the
measurement range.
5 Store Busy 32 During storage.
6 Measured Data Over 64 The voltage or current exceeds its
range.
7 Voltage Peak Over 128 A peak over-range is detected in
the voltage.
8 Current Peak Over 256 A peak over-range is detected in
the current.
9 Not Used 512 (Reserved for future use)
10 Not Used 1024 (Reserved for future use)
11 Not Used 2048 (Reserved for future use)
12 Not Used 4096 (Reserved for future use)
13 Not Used 8192 (Reserved for future use)
14 Not Used 16384 (Reserved for future use)
15 Not Used 32768 (Reserved for future use)