Teledyne Everywhereyoulook BLZZRD, Инструкция по установке и эксплуатации

Страница: 110 / 241

BLZZRD Portable Refrigerated Sampler
Section 5 Extended Programming
5-22
These factors would be applied to the following equation.
From the scenario we can apply the factors to the equation.
At high flow rates, a number below 7 would overfill the bottle. At
low flow rates, a number greater than 16 would collect too little
sample. Therefore, a value should be selected between 7 and 16
pulses.
5.10.3 Calculations when
Using a 700 Series Flow
Module
The same principles discussed in Calculations when Using an
External Flow Meter apply. However, the equations differ slightly
because the flow module directly measures the stream’s flow
volumes. The equation for the high end of the range is:
Using the same scenario the calculations would be:
The equation for the low end of the range is:
The scenario would be applied as:
Therefore, a value should be selected between 709 and 1667
gallons for the given scenario.
(Greatest Total Flow Vol) / (Flow Pulse Vol)
(Total Bottle Vol) / (10 ml per unit)
=
10 ml for every __ pulses
(666,667 gallons / 100 gallons)
(9,400 ml / 10 ml)
=
10 ml for every 7.0 pulses
(Least Total Flow Vol)
(Minimum Required Vol) / (10 ml per unit)
=
10 ml for every __ units
SAMPLE VOLUME:
10 ml FOR EVERY
___ Gallons
500,000 gallons
(3,000 ml) / (10 ml per gallon)
=
10 ml for every 1667 gallons
(Greatest Total Flow Vol)
(Total Bottle Vol) / (10 ml per unit)
=
10 ml for every __ units
666,667 gallons
(9400 ml) / (10 ml per unit)
=
10 ml for every 709 gallons