manualshive.com logo in svg

Teledyne CD14, Руководство пользователя

Поделиться
Скачать
Teledyne CD14 Скачать руководство пользователя страница 63

 

Section F – Operation

 

 

CD14 Tester & CD AutoPlus Autosampler User Guide—75-108-800 Rev. B—31 May 2021 

62 of 130 

EAR99 technology subject to restrictions on cover page. 

 

 

Firmware Update 

The firmware update feature is accessed by touching 

the Update button from the toolbar at the bottom of the 

screen. The firmware update feature allows an operator (with 
the proper permission) to update the firmware of the CD14 
dissolution tester.  

Firmware updates are available as firmware update kits which 
contain update instructions as well as version release history. 
Please follow the instructions included with the kit. 

Security 

The Security button on the main menu 
allows the user access to the Security 

Configuration screen. 

The CD14 Tester can be configured to require users to log in 
and allows for tracking of any changes made to the method. 
The security system allows for three types of users 
(administrators, managers, and operators) and can 
accommodate up to 100 users.  

User Hanson is installed as a manager from the factory. The 
default password for the Hanson manager is 0000.  

Security On/Off Switch: Enables/disables security for the 
instrument if the user has security settings access. Security is 
disabled from the factory by default. 

 

Содержание CD14




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды