manualshive.com logo in svg

Teledyne CD14, Руководство пользователя

Поделиться
Скачать
Teledyne CD14 Скачать руководство пользователя страница 29

 

Section D – Tester Installation 

 

CD14 Tester & CD AutoPlus Autosampler User Guide—75-108-800 Rev. B—31 May 2021 

28 of 130 

EAR99 technology subject to restrictions on cover page. 

 

 

8. 

The people on the rear side should back away from 
the unit as soon as they can while the two on the 
front continue to position the unit with all 5 feet in 
contact with the bench top.  

9. 

Remove the lift handles and oval inserts (5/32” Allen 
hex wrench) from the frame. 

10.  Install the two front frame end caps by lightly tapping 

them in place with a hammer.  

Level the Unit 

1. 

Position the unit on the table to allow for other 
equipment that may need to be installed next to it 
(e.g., autosamplers).  

2. 

The height of the unit has been factory set to within 
3.7 – 3.9 in. (9.4 – 9.9 cm) from the bench top to the 
underside of the bath support plate. 

3. 

Level the unit via the two front feet, and the single 
rear foot under the mast. While doing so, maintain 
the height of the unit within the factory height range. 

 

 

Содержание CD14




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды