FCC Information
This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment, there is a label that contains, among other
information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. The telephone company may
require this information prior to connection of this equipment.
This equipment requires USOC: RJ11 and FIC: 02LS2 which are provided in the installation of the Telecor VS1 Phone System.
An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the
telephone network or premises wiring using a compatible modular jack which is Part 68 compliant.
The REN is useful to determine how many devices you may connect to a single telephone line and still have all of those devices ring when
your number is called. In most, but not all areas, the sum of all RENs per line should be five (5.0) or less. Your local telephone company
can verify the maximum REN per line for your calling area.
If this equipment causes harm to the telephone network, the telephone company may notify you in advance that temporary discontinuance
of service is required. If advance notice is not practical, the telephone company will notify you of discontinuance as soon as possible. You
will also be advised of your right to file a complaint with the FCC.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of your
telephone equipment. If this happens, the telephone company will provide advance notice so that you can modify your equipment to
maintain uninterrupted service.
If the trouble causes harm to the network, the telephone company may ask you to disconnect this equipment from the network until the
problem has been solved. If you experience trouble with this telephone equipment, please contact:
Telecor, Inc., 1114 Westport Crescent, Mississauga, ON, L5T 1G1; 905-564-0801.
You should not try to repair this equipment yourself.
This equipment may not be used on public coin service provided by the telephone company. Connection to party lines is subject to state
tariffs. (Contact your state public utility commission or corporation commission for information.)
This equipment is hearing aid compatible.
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own
expense.
Telecor Display Phone Model 200 (DP200)
Model Number:
HAC DP200
FCC Registration Number:
FTZCHN-31227-KX-E
IC Certification Number:
2760 7997 A
AC REN:
1.6B
Connectors:
(FCC USOC) RJ11C and (IC) CA11A
Authorized Network Port:
(FCC FIC) 02LS2 and (IC) LS
