Tektronix TLA715 Series, Руководство по обслуживанию

Страница: 98 / 147

Removal and Installation Procedures
TLA715 Dual Monitor Portable Mainframe Service Manual
6- 35
Push the cord-wrap feet into the holes in the rear chassis fan tray to snap them
into position. Do the
Rear Chassis Fan Tray installation procedure as shown on
page 6--31.
Internal Components
These procedures describe how to access and replace the following items located
on the left side of the instrument:
H
Memory (SODIMM)
H
Battery
H
Controller board
H
Backplane board (requires you to remove the controller board)
You will need a screwdriver with a T-15 Torx tip to complete the procedures.
Complete the following steps to access the internal components:
1.
Remove the trim ring.
2.
Remove the top and left side covers.
3.
Loosen the screws closest to the sides of the bottom cover.
4.
Remove the eight screws securing the cover to the chassis (see Figure 6--19),
and then lift off the cover.
Installation