Tektronix TLA715 Series, Руководство по обслуживанию

Страница: 55 / 147

Performance Verification Procedures
4- 4
TLA715 Dual Monitor Portable Mainframe Service Manual
Power on the instrument and inspect the rear of the instrument to verify that all
six cooling fans are rotating.
Do the following steps to run the extended diagnostics:
1.
If you have not already done so, power on the instrument and wait for the
logic analyzer application to start.
2.
Go to the System menu and select Calibration and Diagnostics.
3.
Verify that all power-on diagnostics pass.
4.
Click the Extended Diagnostics tab.
5.
Select All Modules, All Tests and then click the Run button on the property
sheet.
All tests that displayed an “Unknown” status will change to a Pass or Fail
status depending on the outcome of the tests.
6.
Scroll through the tests and verify that all tests pass.
The TLA Mainframe Diagnostics are a comprehensive software test that checks
the functionality of the portable mainframe. To run the TLA Mainframe
Diagnostics, do the following steps:
1.
Quit all other applications.
2.
Click the Windows Start button.
3.
Select Programs
→
Tektronix Logic Analyzer
→
TLA Mainframe Diagnos-
tics.
4.
Run the mainframe diagnostics by clicking the Run button or the Single--
Step button in the tool bar.
CheckIt Utilities is a comprehensive software application used to check and
verify the operation of the PC hardware in the portable mainframe. To run the
software, you must have either a keyboard, mouse, or other pointing device.
NOTE
. To check the floppy disk drive or the CD-ROM drive, you must have a test
floppy disk or CD installed before starting the CheckIt Utilities.
Fan Operation
Extended Diagnostics
TLA Mainframe
Diagnostics
CheckIt Utilities