Tektronix TLA715 Series, Руководство по обслуживанию

Страница: 44 / 147

Operating Information
TLA715 Dual Monitor Portable Mainframe Service Manual
2- 5
The mouse connector is a standard six-pin, PS/2-compliant DIN connector. The
mouse port can be connected to an external, standard PS/2-compliant three-but-
ton (wheel) mouse.
The keyboard connector is a standard six-pin PS/2-compliant DIN connector.
The keyboard port can be connected to an external, standard PS/2-compliant
keyboard.
There is a replaceable hard drive. This service manual lists the size of the hard
disk drive available at the time the product was introduced. Consult your
Tektronix Sales Representative for the maximum hard disk drive available.
The mainframe has one CD ROM drive.
The mainframe has one standard 1/2 inch drive that supports 3.5 inch, 1.44 MB,
high-density/double-sided floppy disk media.
The mainframe has four BNC connectors on the rear panel (see Figure 2--4) these
connectors are labeled: SYSTEM TRIG IN, SYSTEM TRIG OUT, EXTERNAL
SIG IN, EXTERNAL SIG OUT.
PC cards (2)
SECONDARY VIDEO
PRIMARY VIDEO
LPT printer port
SYSTEM TRIG IN
SYSTEM TRIG OUT
EXTERNAL SIG IN
EXTERNAL SIG OUT
COM port
Figure 2- 4: Portable mainframe rear panel
Mouse Port
Keyboard Port
Replaceable
Hard Disk Drive
CD ROM Drive
Floppy Disk Drive
External I/O BNCs