Tektronix TLA715 Series, Руководство по обслуживанию

Страница: 53 / 147

Performance Verification Procedures
4- 2
TLA715 Dual Monitor Portable Mainframe Service Manual
Determine equipment
to certify.
Go to appropriate
procedure(s).
Gather required test
equipment.
Use
Tektronix-supplied
probes.
Photocopy the required
Calibration Data Report(s)
.
Enter product model and
serial number(s) on the
Calibration Data Report(s)
.
Configure customer’s
mainframe and modules as
described in procedure.
Set up test equipment.
Select procedure.
Allow all mainframes, modules and
equipment to warm up (30 minutes).
Perform procedure.
Enter measurements on
the appropriate
Calibration Data Report.
Are
measurements
within
tolerance?
Repair or adjust
equipment as
required.
Are
all certifications
complete?
Done
Is it OK
with customer to
remove/reconnect probes
from System
Under Test?
No
No
Yes
Yes
Yes
No
Create necessary
Calibration Certificate.
Figure 4- 1: Calibration/certification procedure flow chart