Tektronix TLA715 Series, Руководство по обслуживанию

Страница: 83 / 147

Removal and Installation Procedures
6- 20
TLA715 Dual Monitor Portable Mainframe Service Manual
Use rubber pull points to
remove/attach elastomeric
keypad from/to front panel
control board
Front panel
control board
Elastomer keypad
Remove screws (6)
Figure 6- 8: Front panel control assembly parts locations
Use the following procedure to reinstall the front panel control board:
1.
Carefully work the control board into position, making sure that all keys go
through their holes in the front panel and that the board is firmly seated.
2.
Insert the six screws that attach the front panel control board to the front
panel control assembly.
3.
Reattach the trackball cable.
4.
Replace the knobs on the front panel.
NOTE
. When you reinstall the CD-ROM drive assembly, make sure that you do
not damage the front panel knobs by applying too much preasure on the back of
the front panel control assembly.
5.
Reinstall the CD-ROM drive assembly.
6.
Reinstall the front panel assembly.
Installation