Tektronix TLA715 Series, Руководство по обслуживанию

Страница: 34 / 147

Specifications
TLA715 Dual Monitor Portable Mainframe Service Manual
1- 11
Table 1- 6: Rear panel interface
Characteristic Description
Parallel interface port 36-pin high-density connector supports Output only, Enhanced Parallel Port (EPP), or Microsoft
high-speed mode (ECP)
Complies with IEEE P1284-C/D2 for bi-directional Parallel Peripheral Interface for Personal
Computers (draft) style 1284-C
Serial interface port 9-pin male sub-D connector to support RS-232 serial port.
SVGA output Port 1 and Port 2 Two 15-pin sub-D SVGA connectors
PC CardBus32 port Standard Type I, II, III PC-compatible, PC card slot.
Complies with PCMCIA 2.1 and JEIDA 4.1
Table 1- 7: AC power source
Characteristic Description
Source voltage and frequency 90 V
RMS
to 250 V
RMS
, 45 Hz to 66 Hz, continuous range CAT II;
100 V
RMS
to 132 V
RMS
, 360 Hz to 440 Hz, continuous range CAT II
Fuse rating
90 V to 250 V operation
(159--0046--00) UL198/CSA C22.2
0.25 in
×
1.25 in, Fast Blow, 8 A, 250 V
90 V to 250 V operation
(159--0381--00) IEC 127/Sheet 1
5 mm
×
20 mm, Fast Blow, 6.3 A, 250 V
Maximum power consumption 600 W
Steady-state input current 6 A
RMS
maximum at 90 VAC
RMS
, 60 Hz or 100 VAC
RMS
, 400 Hz
Inrush surge current 70 A maximum
Power factor correction Yes
On/Sleep indicator Green/yellow front panel LED located next to On/Standby switch provides visual feedback when
the On/Off switch is actuated. When the LED is green, the instrument is powered and the
processor is not sleeping. When the LED is yellow, the instrument is powered, but the processor
is sleeping.
On/Standby switch and indicator Front panel On/Standby switch. Users can push the switch to power down the instrument
without going through the Windows shutdown process; the instrument normally powers down.
The power cord provides main power disconnect.