Tektronix TDSUSB2, Руководство пользователя

Страница: 39 / 250

Operating Basics
Figure 9: Setting advanced preferences
In the General tab, you can select the following options:
Set a warning to indicate that the configuration options were not changed
since the last time you ran the application. If you set this option, the
application prompts you to configure the measurements before acquiring
data
Automatically display the Eye Diagram without having to select the Eye
Diagram button in the Results screen
Automatically display the Waveform Plot without having to select the
Waveform Plot in the Results screen
Prompt for a File name or Device ID before automatically generating reports
or data files
Automatically generate .tsv files
Display the generated report
Always display the waiver mask for High-Speed Near End and Low Speed
eye diagrams
Do Autoset Every Time.
Note: Autoset will happen only for Full-Speed/High Speed SQC measurements.
TDSUSB2 Universal Serial Bus Measurement Package 25