Analyze Waveform or Trace Data
The math waveform will appear on the display
as a red trace.
6.
Push
Label
from the lower-menu and use
the resulting side-menu choices to give your
math trace an appropriate label.
NOTE.
The oscilloscope will only complete the calculation if the units of measure of the source waveforms, when combined,
make logical sense.
Using Reference Waveforms and Traces
Create and store a reference waveform or trace. For example, you might do this to set up a standard against which to
compare other waveforms. To use the reference waveforms or traces:
NOTE.
10 M and 20 M reference waveforms are volatile and not saved when the oscilloscope power is turned off. To
keep these waveforms, save them to external storage.
1.
Push
Ref R
. This brings up the lower-bezel
reference menu.
2.
Use the resulting lower-bezel menu
selections to display or select a reference
waveform or trace.
(R1) |
(On)
3-May-07
(R2) |
(Off)
(R3) |
(Off)
(R4) |
(Off)
142
MDO4000 Series Oscilloscopes User Manual
Содержание MDO4054-3
