manualshive.com logo in svg

Teknor Industrial Computers TEK-CPCI 1003, Техническое справочное руководство


Поделиться
Скачать
background image

Onboard Features

7-11

7.9.2 Serial Port 2

Serial Port 2 is buffered directly for RS-232 operations and is 16C550 PC-Compatible. The
interface includes the complete signal set for handshaking, modem control, interrupt
generation, and data transfer.

When assigned as COM2 logical port, the port is 100% compatible with the IBM-AT serial
port.

SIGNAL PATH

Serial Port 2 signals are only available through the J3 CPCI I/O connector.

7.9.3 Serial Port 3

The Serial Port 3 supports Infrared, RS-232, RS-422, and RS-485 operation modes. When
assigned as COM3, the port is 100% compatible with the IBM-AT serial port in RS-232
mode.

RS-422 and RS-485 modes allow communication using differential signals through one pair
of wires (RS-485) or two (RS-422) to increase the noise immunity during data transfers.

RS-422 and RS-485 protocols offer advantages such as increased speed over longer distances
or improved reliability over similar RS-232 setups.

SIGNAL PATHS

In RS-232, RS-422, and RS-485 operation modes Serial Port 3 signals are only
available through the J5 CPCI I/O connector.

In Infrared mode, signals are available through the J2 CPCI I/O connector.

Содержание TEK-CPCI 1003



























































































































Отзывы:

Нет отзывов

Похожие инструкции для TEK-CPCI 1003

IEI Technology WAFER-PV-D4252 User Manual preview
WAFER-PV-D4252
Бренд: IEI Technology Страницы: 142

Бренды по названию

Популярные бренды

Загрузить еще бренды