manualshive.com logo in svg

Teknor Industrial Computers TEK-CPCI 1003, Техническое справочное руководство

Поделиться
Скачать
Teknor Industrial Computers TEK-CPCI 1003 Скачать руководство пользователя страница 23

7-1

7. ONBOARD FEATURES

7.1 COMPACTFLASH INTERFACE

The board supports an IDE compatible flash disk by using a CompactFlash module.
CompactFlash (C-Flash) disks are the world’s smallest resident industry-standard
ATA/IDE subsystem for application, data, image, and audio storage. They have the same
functionality and capabilities as intelligent disk drives, but with the advantages of being
very compact, rugged (typical M.T.B.F. is 1,000,000 hours) and low power.

Available capacities are up to 24MB. 40 and 80MB modules will be supported when
available.

The C-Flash disk connects on the TEK-CPCI-1003 via the onboard Flash Disk connector
referred to as J11.

7.1.1 Working with CompactFlash Module

Follow this procedure to install a CompactFlash disk on the TEK-CPCI-1003 board:

1.

 

Slide the CompactFlash disk into its receptacle and press gently to ensure a good
insertion and connection.

2.

 

Clip the spacers into the mounting holes: they are located close to the connector.

CompactFlash

Module

CompactFlash

Disk

Содержание TEK-CPCI 1003



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды