TeeJet UniPilot Pro, Руководство по установке, Страница: 8 / 20

2
www.teejet.com
UniPilot ® Pro
UniPilot Pro Switch Kit
The Switch Kit components enable the operator to move the ESD between vehicles.
NOTE: An anti-rotation bracket that fits your vehicle steering column is required to complete the UniPilot Pro installation. This bracket
varies by vehicle model and must be purchased separately. Contact your UniPilot Pro dealer for a list of supported vehicles and
available bracket kits.
Figure 2: UniPilot Pro Switch Kit Components
6 7
1
2
3
4
5
UniPilot Pro Switch Kit
Item Part # Description Qty
1 402-0019-02 Upper Ring 1
2 402-0024-03 5.75 x 0.50 Spacer 1
3 402-0024-04 5.75 ID x 0.25 Spacer 1
4 Consult Dealer Ring Cap Assembly 1
5 200-0621-01 Main Gear Assembly 1
6 200-0635-01 Hardware Kit 1
7
808-0015-01
808-0039-01
Hex Keys (5/32" & 7/64") 1
NOTE: All part numbers provided in this manual are subject to change without notice. They are provided as a reference at the time of this
writing. Always verify that the part numbers are still valid from your UniPilot Pro dealer if spare parts need to be ordered.