TeeJet UniPilot Pro, Руководство по установке, Страница: 12 / 20

6
www.teejet.com
UniPilot ® Pro
Figure 12: Anti-rotation Pin Locations
Bottom Position
Three O’clock Position
Nine O’clock Position
3. Assemble the anti-rotation pin by inserting the long screw
through the metal sleeve provided.
4. Install the anti-rotation pin under the ESD in one of the three
positions and tighten to 100 in.lbs (11.3 Nm) using the 3/16" hex
key (Allen key) provided.
NOTE: The anti-rotation pin must always be kept tight to
avoid breakage or separation. Periodically check the anti-
rotation pin and confirm that it is tight. Always tighten to the
specified torque.
INSTALL THE ESD
This procedure describes the installation of the ESD to the Main Gear
1. Open the ESD release latch.
Figure 13: Release latch
Release Latch
2. Fit the ESD around the Main Gear so that the three ESD rollers
align on the Main Gear race.
NOTE: The plastic cover on the ESD can be used as a guide
to fit the bottom portion of the ESD to the V-rollers.
Figure 14: Roller Engagement
Rollers
Gear Face
3. Ensure that the main gear race has properly engaged the three
rollers before closing latch.
4. Rotate the ESD manually to ensure smooth rolling operation.