TeeJet UniPilot Pro, Руководство по установке, Страница: 13 / 20

7
98-05342 R1 EN
UniPilot ® Pro
CHAPTER 3 – UNIPILOT PRO ANTI-ROTATION BRACKET INSTALLATION
The UniPilot Pro anti-rotation bracket is available through your dealer. It should be used for vehicles that are not supported with a custom
vehicle-specific bracket. Consult your UniPilot Pro dealer for a list of all available anti-rotation brackets. An Anti-rotation bracket is required to
complete the UniPilot Pro installation.
NOTE: A different bracket may be required depending on your specific vehicle. Contact your UniPilot Pro dealer for details.
NOTE: If you are installing a custom specific vehicle anti-rotation bracket, skip this section and refer to the instruction manual provided with
your vehicle specific anti-rotation bracket kit.
UniPilot Pro Anti-Rotation Bracket Installation Kit Overview
To complete your UniPilot Pro installation and prevent the rotation of the ESD (Electric Steering Device), an anti-rotation bracket must be
mounted to the vehicle steering column just below the steering wheel. This chapter provides instructions for installing a universal bracket kit
that is available as an accessory through your FieldPilot Pro & UniPilot Pro dealer. Many other brackets are available to fit specific vehicles
models and can be ordered through your FieldPilot Pro & UniPilot Pro dealer. Contact your dealer for details and availability for your vehicle
model.
The Typical universal bracket kit includes the components.
Figure 15: Typical Universal Bracket Kit
Table 2: Universal bracket kit components
Item Part # Description Qty
1 522-0001-01 Flange Bearing 1
2 203-0218-01 Fifth Wheel Slider 1
3 202-0216-01 Front Bracket 1
4 202-0232-01 Back Bracket (‘V’ shape) 1
5 514-0088-01 Clamping screws. Machine Screw Phillips 1/4 - 20 x 4" (Washers, Lock Washers and Nuts) 4
6 512-0029-01 Bolts 5/16 -18 x 3/4" (Slider Attaching Bolts) 2