TeeJet UniPilot Pro, Руководство по установке, Страница: 7 / 20

1
98-05342 R1 EN
UniPilot ® Pro
CHAPTER 1 – COMPONENTS
Supported Models
These instructions provide the suggested procedure for installing the UniPilot Pro system on qualified vehicles for the easiest installation and
best performance. This product is compatible with most vehicles with a three spoke steering wheel with hydrostatic power steering.
NOTE: The installer can install the UniPilot Pro system differently than how the manufacturer suggests; however the components that are
called out in this manual may not fit properly or the lengths of cables may not be long enough with alternative mounting solutions. If
the installer modifies the installation procedure, it is the responsibility of the installer to ensure all the components will work and that
any component with specific orientation and mounting requirements are met.
UniPilot Pro Main Hardware Kit
NOTE: The kits listed below are used for illustrations purposes. Hardware Kit part numbers will vary.
This section describes the UniPilot Pro components required for a typical installation. The installation kit is organized into a main kit that
contains a “switch kit” subassembly. The Switch Kit contains the hardware that enables you to switch the UniPilot Pro system between
vehicles.
The UniPilot Pro installation may require the components listed below.
Figure 1: ESD Kit
1 2 3
Table 1: ESD Kit
Item Part # Description Qty
1 91-05023 Electric Steering Device, UniPilot Pro 1
2 91-05024 Switch Kit, UniPilot Pro 1
3
65-05246 UniPilot Pro Anti-rotation Bracket Kit
1
65-05250 Assy. Anti-Rotation Pin UniPilot Pro
98-05342 UniPilot Pro Installation Guide 1
The sub-kits that are required for the installation of the UniPilot Pro system are provided in this section. Use this section to verify that all the
sub-kits and parts required for the installation are available.
NOTE: All part numbers provided in this manual are subject to change without notice. They are provided as a reference at the time of this
writing. Always verify that the part numbers are still valid from your UniPilot Pro dealer if spare parts need to be ordered.