34
www.teejet.com
Aeros 9040 Field Computer
Current Tip
Current tip shows the active tip for determining current droplet size
information. Tips must be preset to be available for current tip selection.
1. Press desired tip.
Selected tip will be shown:
◄The information box on the Implement screen
◄The Droplet/pressure status display from the status bar on the
guidance screens
VC
55
psi
Mark A
AIXR TeeJet® AIXR21004
Very coarse
0 15 30 45 60 75 90 psi
55
psi
DROPLET SIZE MONITOR
When the system includes a Pressure Sensor Interface Kit (PSIK),
Droplet Size Monitor can be enabled/disabled. The DSM then becomes
available on the operation screens.
Setup
Enable/Disable DSM
1. Press CONFIGURATION side tab
.
2. Press
Implement
.
3. Press
Droplet Size Monitor
.
4. Select if Droplet Size Monitor is enabled or disabled.
5. Press RETURN arrow or CONFIGURATION side tab
to
return to the main Configuration screen.
NOTE: When Droplet Size Monitor is disabled, the Droplet/pressure
status is not available on the guidance screen status bar.
Tip Selection / Current Tip
To establish the tip presets and current tip, see “Tip Selection” in this
chapter.
Input/Output Module Pressure Sensor
When a Pressure Sensor Interface Kit is present, Pressure sensor
options are used to enter the sensor manufacture’s maximum pressure
rating and set high and low user determined pressure alarms.
NOTE: For more information, see “Sensors” in the Setup chapter of
this manual.
