20
www.teejet.com
Aeros 9040 Field Computer
Circle Pivot Guidance
Circle Pivot guidance provides guidance around a central location that radiates inward
or outward based on an initial AB reference line. This initial baseline is used to calculate
all other guidelines.
It is used for product application in a center pivot field while being guided along a
circular guideline that matches a center pivot irrigation system radius.
NOTE: Offset to adjacent guidelines will be calculated using the guidance width: see
“Configuration-> Mapping and guidance” in the System setup chapter.
Last Pass Guidance
Last Pass guidance* offers true last-pass navigation. The console will automatically
detect the nearest applied area and establish parallel guidelines based on that area.
NOTE: If a boundary is established but no application occurred during the boundary
process, guidance will not initiate.
NextRow Guidance
NextRow guidance* indicates where the NextRow is located, and provides guidance
at row ends to the next adjacent row. When the operator marks the end of the row and
begins turning to the next row, a Straight AB guidance line is provided in the next row.
When the vehicle is in the NextRow, guidance is turned off.
NOTE: Offset to NextRow will be calculated using the guidance width: see
“Configuration-> Mapping and guidance” in the System setup chapter.
The NextRow Guidance does not support skipping rows.
No Guidance
No guidance* turns off guidance.
NOTE: No guidance mode does not delete established guide lines or points from the console. To delete established/saved data from
the console, see “Data management” in the System setup chapter.
*Guidance options may not be available depending on assisted/automatic steering system installed.
Adjacent rows may be skipped in Straight AB guidance, Curved AB guidance, Adaptive Curve guidance and Circle Pivot guidance. Last Pass
guidance and NextRow guidance do not support skipping adjacent rows.
