14
www.teejet.com
Aeros 9040 Field Computer
ADD RATE CONTROL
NOTE: TeeJet Dual Control Module (DCM) is no longer supported and
will not be referenced in this manual.
ISOBUS universal terminal (UT) gives access to an ISOBUS electronic
control unit (ECU) options and operation. This provides crop sprayer or
spreader control when integrated into the implement of either capability.
NOTE: For detailed setup instructions, refer to the specific ISOBUS
user manual for the connected ECU.
1. Press UNIVERSAL TERMINAL bottom tab
.
20.00
gal/ac
66.00
ac
Mark A
Soft Keys Area
Active ISOBUS ECUs Available on System
Activity Window
Ready for Operation
Upon starting up the system, an ISOBUS product may take a few
minutes to load all required information or object pools.
Before starting a job, check to be sure the ISOBUS ECU is ready.
• Home Screen is available
• Tack Control (TC) is active – Active Trip Count Number should
show “TC”
20.00
gal/ac
66.00
ac
Mark A
Guidance Screen Options
When a ISOBUS Electronic Control Unit (ECU) sprayer or spreader
control is integrated into the implement, rate control options and
mapping options are available on the Vehicle View and Field View
guidance screens.
Application Control Options Tab
Current Pressure
Mapping Options Tab
10.0
mph
55
(psi)
27.00
ac
Mark A
Guidance Bar
Current Pressure
Displays the current pressure to the tip.
Guidance Bar
In addition to the standard Guidance bar options, the following
selectable information will become available with an ISOBUS ECU:
►Actual Application Rate – displays the current application rate
►Target Application Rate – displays the target application rate
►Volume/Product Applied – displays the volume or weight of
product applied
►Tank/Bin Amount Remaining – displays the volume or weight of
product remaining in the tank/bin
10.0
mph
55
(psi)
27.00
ac
Mark A
System Pressure
Actual
Application Rate
Droplet Size
Target
Application Rate
Volume/Product
Applied
Tank/Bin Amount
Remaining
