Tecnoalarm Tecnofire TF-A1-298-DE, Руководство по установке

Страница: 9 / 56

TFA1-298
9
2 - SYSTEM RESOURCES
The TFA1-298 control panel manages 1 detection loop.
The TFA1-298 addressable fi re alarm panel is designed and manufactured in accordance with the standards EN 54-2:1997 +
A1:2006 (control panel) and EN 54-4:1997 + A1:2002 + A2:2006 (power supply).
It was designed under a quality system certi fi ed ISO 9001 that involves the application of a set of rules for the design and all
subsequent activities necessary for the production. All the components of the equipment were selected for the intended purposes.
Their speci
fi cations are guarenteed, if the environmental conditions outside the casing correspond to those speci fi ed for the class
3K5 of the standard EN 60721-3-3:1995.
The control panel should be installed in indoor areas, monitoring of temperature and humidity is not required.
The control panel consists of a metal casing with space for two 12V/7.2Ah batteries, a CPU board, which integrates the user
interface consisting of a display and a keypad, a switching 24V/2.7Ah power supply (ALSW2827) and a terminal board.
General speci fi cations TFA1-298
Repeaters
5
Detection loops
1
Detectors per loop 199
Modules per loop 99
Zones
150
Virtual zones
100
Access periods 8
Access levels 4
Codes
10
Formulas
100
Alarm plans 50
Warning: the TFA1-298 control panel is certi fi ed with the following options with requirements from EN 54-2
7.8 Outputs to fi re alarm devices
7.11 Output delays
7.12 Dependencies on more than one alarm signal (type B)
8.3 Failure signals from points
9.5 Disablement of addressable points
10 Test conditions
Warning: the power supply of the TFA1-298 control panel is certi fi ed to the requirements of EN 54-4
5.1 Power supply from the main power source
5.2 Power supply from the stand-by power source (battery)
5.3 Battery charging and check
5.4 Recognition and signaling of power supply failures