manualshive.com logo in svg

Tecnoalarm Tecnofire TF-A1-298-DE, Руководство по установке

Поделиться
Скачать
Tecnoalarm Tecnofire TF-A1-298-DE Скачать руководство пользователя страница 26

TFA1-298

26

The below table illustrates the icons that the control panel uses to optically support the noti

fi

 cation of its operating states, alarms, 

failures etc.

5-7 - Icons

ICONS

No mains power

This icon signals power failure.

Battery charger failure

This icon signals that the power supply is not able to charge
the battery.

General failure

This icon signals that the indicated device is in failure state.

Low battery

This icon signals that battery voltage is low.

Active technical prealarm 

This icon signals that the indicated device is in technical 
prealarm state.

Battery failure

This icon signals that the battery is damaged and cannot be 
recharged.

Active technical alarm 

This icon signals that the indicated device is in technical
alarm state.

Zone under test

This icon signals that the indicated device is under test.

Active 

fi

 re prealarm 

This icon signals that the indicated device is in prealarm state.

Loop communication failure

This icon signals that the communication between the control 
panel and the devices connected on the loop has broken down.

Active 

fi

 re alarm 

This icon signals that the indicated device is in alarm state.

Detectors maintenance request

This icon signals that the indicated optical detector needs 
maintenance (smoke chamber cleaning).

Alarm by tested device

This icon signals that the tested device is in alarm state.

Reset delays

This icon signals that the delays have been reset.

Control panel repeater exclusion

The icon signals that the signaling outputs of the control panel 
are excluded. 

Noti

fi

 cation carried out

This icon signals that the indicated noti

fi

 cation has been 

transmitted.

Device exclusion

This icon signals that the indicated device is excluded.

Monitored system mode

This icon signals that the monitored system mode has been 
activated.

System failure

This icon signals the presence of a system failure.

Network communication failure

The icon signals that the network connection between the 
system devices connected on the serial bus has been broken 
down.

System event

This icon signals the presence of an event related to the system.

Earth leakage

This icon signals that a cable or device of the system has 
recorded earth leakage current.

Содержание Tecnofire TF-A1-298-DE

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды