Tecnoalarm Tecnofire TF-A1-298-DE, Руководство по установке

Страница: 19 / 56

TFA1-298
19
OK
1
4
7
2
5
8
0
6
9
3
ESC ESC
BACK BACK
5 - USER INTERFACE
The user interface of the control panel consists of a 480 x 272 pixels TFT color graphic display, 16 signaling LED, 5 function
keys, 7 navigation keys and 10 number keys, with which the user can manage the system. The user interface is completed by the
speaker that, according to the functional states of the control panel, provides audible alarms or noti
fi cations by using the voice
synthesis function.
5-1 - Control panel
5-2 - Access levels and codes
Control panel working
Level 2
Release: 2.0.00 ENG
Level 3 Level 4
16/02/2019 Access level 1 08:00:00
Fire control panel
The control panel manages 10 access codes associated to 4 levels of access: level 1 (not protected by code), level 2 (user),
level 3 (installation and maintenance personnel) and level 4 (manufacturer).
Level 1
In stand-by, the control panel provides access to the functions reserved to the level 1, without having to enter a code.
The access level 1 allows to perform the following operations:
A - Access the upper levels with the keys 1 or 2 or 3 and the relevant code (password)
B - Acknowledge the alarm pressing the ACK key
C - Display the acknowledged, the ongoing alarms and those stored in the event categories folders.
Level 2
To access level 2 press the key 1 and enter the relevant user code, then press the con fi rmation key.
At level 2, it is possible to perform all the operations of the level 1, plus the followings:
A - Reset the control panel pressing the RESET key.
B - Switch the operating state of the control panel (monitored/not monitored).
C - Manually activate an evacuation alarm.
D - Access the list of menus reserved to level 2.
E - Stop and reset the sirens.
Level 3
To access level 3 press the key 2 and enter the relevant installer code, then press the con fi rmation key.
Access to level 3 is reserved to staff authorized to edit important operating parameters.
At level 3 it is possible to perform all the operations of the levels 1 and 2 and to access the menus reserved to level 3
(system con
fi guration menu)
Level 4
To access level 4 close the JP5 KEY jumper, press the key 3 and enter the manufacturer code, then press the con fi rmation key.
Access to level 4 is reserved to highly quali fi ed personnel authorised by the manufacturer to carry out technical services of special
importance.
At level 4 it is possible to perform all the operations of the previous levels and to access the menus reserved to level 4.
The following table shows how to enter the codes and access the different access levels:
Access level key + code + con
fi rmation key.
RESET
EVACUATE
ACK
MONITORED
STOP/RESET
SIRENS