Technosoft 2016
15
iPOS4808 MY-CAN-STO/-CAT-STO Technical Reference
3.3 Mechanical Mounting
The iPOS4808
drive is intended to be mounted horizontally on a motherboard equipped with the recommended mating
connectors, as specified in chapter
3.5.2 Mating Connectors
. Several drives can be hosted by a single motherboard.
For thermal calculations:
-
the iPOS4808 MY-CAN-STO drive can be assumed to generate 2.2 Watt (= 8 BTU/hour) at idle, and up to 5.7
Watt (= 20 BTU/hour) worst case while driving a motor.
-
the iPOS4808 MY-CAT-STO drive can be assumed to generate 3.7 Watt (= 8 BTU/hour) at idle, and up to 7.2 Watt
(= 25 BTU/hour) worst case while driving a motor.
3.3.1
iPOS4808 MY-CAN-STO PCB Footprint
For iPOS4808 MY-CAN-STO motherboard PCB design, use the dimensional drawing from
Figure
3
.
2
below.
Figure 3.2
iPOS4808 MY-CAN-STO PCB Footprint
All dimensions are in mm. Holes are marked with
RED
.
3.3.2
iPOS4808 MY-CAT-STO PCB Footprint
For iPOS4808 MY-CAT-STO motherboard PCB design, use the dimensional drawing from
Figure
3
.
3
below.
Figure 3.3
iPOS4808 MY-CAT-STO PCB Footprint
All dimensions are in mm. Holes are marked with
RED
.
