TM-NANO-3T Combo User’s Manual
54
The Parental control services Editor will open up. All services beginning with the letter "Z" are shown.
Select “ZDF HD” and press the OK button.
A symbolized padlock will appear in front of the channel letting you know that it can only be watched
when the right pin code is entered.
I
f you have selected whitelist under the “Parental control type” then this channel will be the only one
that can be viewed without entering the right pin code.
Next time when you or anyone else want to tune into this service, the menu asking for PIN code will
appear instantly as below.
Protecting the parental lock setup
Additionally you have the option to protect the parental control menu using a pin code.
Setting the “Protect setup” option to yes you will only be able to change parental control setting after
you have entered the correct pin code.
Once you entered the wrong pin code three times in a row you have to wait 15 minutes before you
can try again.
Note:
You can use two different pin codes to protect the setup and the service list.
2-4. Factory Reset
If you want to erase all installed service list as well as all configurations, run the Factory Reset process.
Upon the completion of factory reset process, your STB will reboot automatically and start the First
Time Installation process.
NOTE
: If you do this factory reset, all of your
configuration data including bouquets, service lists,
satellite parameters, and so on will be erased.
