TM-NANO-3T Combo User’s Manual
37
• Only Free Scan
: Here you have two options for NO and YES. If you want to scan only Free to Air channels without
any encryption, select YES. Otherwise, select NO to scan all FTA and CAS channels.
Press OK to activate the manual scan. This will take some minutes. As the scan proceeds, you will
see the progressive bar and the newly found services underneath.
[ In case of DVB-T/T2 by Tuner C ]
• Tuner
: You need to decide which tuner you want to use for manual scan.
• Type of scan
: Select Single transponder or Complete.
Single transponder is to scan input frequency only, and Complete is for all frequency selected.
• Use frequency or channel
: Select Channel or Frequency
Frequency is to use input frequency, and Channel is to use frequency of selected T(2) provider.
• System
: Select DVB-T or DVB-T2
• Frequency
: You need to enter the exact frequency of the transponder that you want to scan.
• Bandwidth
: Input bandwidth value
[In case of DVB-C by Tuner C]
