TM-NANO-3T Combo User’s Manual
39
Amongst the parameters given in this menu, the following ones are generally what you need to decide
for the audio and video.
1. Video output :
This option selects to which output the video signal will be sent to.
- HDMI : If you have connected your TV to the HDMI output of your set-top box
set the “Output
type” option to HDMI.
- HDMI-PC : If you have connected your PC to the HDMI output of your set-top box
set the “Output
type” option to HDMI-PC.
2. Mode
: Use the Navigation buttons left/right to select the desired screen resolution. This option is only
available for the output types HDMI.
3. Refresh Rate
: Select the refresh rate supported by your TV screen. This is either 50Hz, 60Hz and multi. This
option is only available for the output types HDMI.
4. Display 4:3 content as :
- Pillarbox : 4:3 shows will be shown in full height on a 16:9 screen and you will have black bars
on both sides.
- Pan&Scan : 4:3 shows will be shown in full width on a 16:9 screen and a bit will be cut off on the
top and bottom.
- Just Scale : 4:3 shows will be shown in full height on a 16:9 screen and are stretched to fit the
width of your screen.
- Nonlinear : Only the outer parts of the picture are stretched to prevent the center from being
distorted. You will still have a full screen picture.
5. Display 16:9 content as :
- Letterbox :
16:9 programs will be displayed on 4:3 TV’s with black beams at top and bottom.
- Just Scale : 4:3 shows will be shown in full height on a 16:9 screen and are stretched to fit the
width of your screen.
- Pan&Scan :
16:9 programs will be zoomed to full hight on 4:3 TV’s, parts of the picture on the left
and right side will cut off.
6. AC3 / DTS downmix
:
If you’re watching a show with a AC3 audio track it will be changed into a stereo signal. Set this
option to
“yes” if your have an AV receiver that does not support Dolby Digital.
