TM-NANO-3T Combo User’s Manual
38
• Tuner
: You need to decide which tuner you want to use for manual scan.
• Type of scan
: Select Single transponder or Complete.
Single transponder is to scan input frequency only, and Complete is for all frequency selected.
• Symbol Rate
: You need to enter the exact symbol rate of the transponder that you want to scan.
• Modulation
: Here you have five options for 16-QAM,32-QAM,64-QAM,128-QAM,256-QAM.
• FEC (Forward Error Correction)
: You need to enter the exact FEC value of the transponder that you want to scan.
• Network scan
: Here you have two options for YES and NO.
NO is used to scan the transponder (TP) based on the data that your set-top box currently has.
YES is used to scan the TP not just based on the existing TP data but also using new TP data, if
there is TP data newly transported from the TP. Naturally, YES option takes longer while it may
show better scan result.
• Clear before scan
: YES is used when you want to delete the existing channel list before you start the scan. If you
want to keep the existing list, select NO.
• Only Free Scan
: Here you have two options for NO and YES. If you want to scan only Free to Air channels without
any encryption, select YES. Otherwise, select NO to scan all FTA and CAS channels.
2-2. System Configuration
Here you can find most of the necessary settings that you might need to optimize your set-top box in
the way you like it. Please read the followings carefully.
2-2-1. A/V Settings
Here you will find options necessary to set up the audio and video configuration of your set-top box.
