Technomate TM-Nano-3T Combo Скачать руководство пользователя страница 18

Страница: 18 / 66

TM-NANO-3T Combo User’s Manual

IV. Basic Operation

1. Turning your set-top box on and off

Use the power button to turn your set-top box on and off.

To put your set-top box into standby mode either press the power button on your remote control or

directly on your set-top box.

Holding down the power button on your remote control for three seconds will put your set-top box into

the deep standby mode.

You can also put your set-top box into deep standby mode by using the OSD main menu. Choose the

option

“Standby / Restart” in the OSD main menu and navigate to “Deep Standby” option afterwards.

Pressing the OK button will put your set-top box into the deep standby mode.

This is the Standby / Restart menu. Navigate to the desired option and

confirm by pressing the OK button.

•

Sleep timer:

Put your set-top box into standby after duration of time that

can be chosen freely. Please refer to the page 32.

•Standby

: Puts your set-top box into standby mode.

•Restart:

Your set-top box will be rebooted.

•Restart enigma:

Your set-top box will be restart enigma.

•Deep Standby:

Puts your set-top box into deep standby mode.

2. Service selection

Pressing the CH up/down buttons on your set-top box remote control will take you to the previous or

next service.

Pressing the 0 will enable you to skip back and forth between the two most recently watched services.

This feature is quite useful during commercial breaks since it enables you to watch another channel and

quickly check if your movie is back on.

Using the

“<” / “>” buttons left/right you can switch to the 20 last viewed services.

3. Switching Channel

Set-top box offers various channel zapping methods. You can switch the current channel by pressing

• Up/Down button

: If you press Up or Down, channel selection

menu appears. You can move up and down to
select the channel that you want to tune into.

• Left/Right button

: If you press Left or Right, the previous or

subsequent channel of the current channel is tuned
in.

• Channel Up/Down key

: If you press CH Up/Down key, this will call up /down channel.

Содержание TM-Nano-3T Combo



































































Результаты поиска

Содержание TM-Nano-3T Combo

Отзывы:

Похожие инструкции для TM-Nano-3T Combo

Бренды по названию

Популярные бренды

Technomate TM-Nano-3T Combo, Руководство пользователя

Результаты поиска

Содержание TM-Nano-3T Combo

Отзывы:

Похожие инструкции для TM-Nano-3T Combo

Бренды по названию

Популярные бренды