TM-NANO-3T Combo User’s Manual
35
2-1. Service Searching
: Here you set up the tuners of your set-top box and run channel scanning automatically or manually.
2-1-1. Tuner configuration
: If you run the First Time Installation process (refer to the page 14~16), the Tuner A, B and C are
already configured. You can check the information of each Tuner and which satellites are scanned by
each Tuner as follows.
2-1-2. Default Channel List
In case there are service lists available for certain satellites, for example, Motorized or fixed (Astra
and Hotbird), you can install the lists in the channel list of your set-top box.
If default service lists are not available, you can run the service scan automatically or manually to
add TV and radio channels to the channel list of your set-top box.
2-1-3. Automatic Scan
: The easiest way to scan services is to use Automatic Scan. In the Automatic Scan menu, there are
3 options to choose from as below.
• Clear before Scan
: Yes is used when you want to delete the existing channel list before you start the automatic scan.
If you want to keep the existing list, select No.
• Scan Tuner A (DVB-S2) (or together with Tuner B / Tuner C)
: If Tuner A and B are configured for the same satellite(s), only Tuner A will appear. If not, both
Tuner A and B will appear, asking you which one you want to scan.
