Page 14 of 52
THIS MANUAL IS THE PROPERTY OF
TECHNOGEL SpA
–
ALL REPRODUCTIONS, EVEN PARTIAL, ARE FORBIDDEN
14
4 - FUNCTIONING AND USE
4.1
DESCRIPTION OF THE FUNCTIONING
4.1.1
Description of controls
The machine controls are placed on its front panel in an ergonomically comfortable position for the operator
to access it.
The operator has direct access to the machine.
"START" KEY
Pressing this button switches on the machine placing it in "STAND-BY"
while awaiting further commands. The pressed button remains on (green
light). This button is used to switch-off the equipment in any functioning
cycle mode, with machine on.
The controls are located on the control panel (DISPLAY) enabling the interaction with the micro-processor
controlling machine functioning.
Fig. 4.1
– Control panel
1 - ARROW KEY
