C:\Documents and Settings\mconti.TECHNOGEL-USA\My Documents\MACCHINE\ARTESAN\ART
MANUALS\Mantegel\Inglese\MG 2V Istruzioni Inglese 01-08.doc
16
TECHNOGEL spa CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED BY
INCORRECT POSITIONING OF THE MACHINE IN AN UNSUITABLE PLACE. THE
COMPANY IS ALSO UNABLE TO ASSUME ANY RESPONSIBILITY FOR INADEQUATE
PERFORMANCE OF THE MACHINE OWING TO OPERATING CONDITIONS BEING
BEYOND THE LIMITS OF ACCEPTABILITY.
Positioning of machine with fixed air condenser
VALID FOR MACHINES WITH EITHER AIR CONDENSATION OR AIR/WATER COMBINED
It is extremely important that the machine should be installed in a spacious room w ith doors
and w indow s so the air heated by the machine can be changed regularly.
The rear of the machine must be place at a distance of at least 0.5 metres from the wall.
During operation of the machine, the doors and w indow s in the room must be left open
otherw ise the air heated by the machine w ill become extremely hot and could reach
temperatures of around
50° C.
If the machine is allow ed to operate in these conditions the
main components (refrigerator compressor and turbine motor) could w ell overheat over the
long term and this could jeopardize correct operation of the machine and cause damage w hich
w ould be costly to repair. It w ould also mean an increase in running costs ow ing to the high
consumption of electricity w hile the machine’ s performance w ould be reduced by 50%.
IDEAL POSITIONING OF THE MACHINE
As show n in the diagram, t he air coming in through t he door (
1
) is sucked in and heated
during condensation of the ventilators (
2
) and is pushed in the direction of the w indow (
3
)
and t hus outside.
The ideal solution, though not alw ays easy to put into practice, is to make holes in the w all
(
4
) opposite the ventilators (
2
). The air can t herefore flow out freely w ithout any problem and
the machine’ s performance w ill alw ays be excellent.
