C:\Documents and Settings\mconti.TECHNOGEL-USA\My Documents\MACCHINE\ARTESAN\ART
MANUALS\Mantegel\Inglese\MG 2V Istruzioni Inglese 01-08.doc
43
Cleaning the lid and control console
The blue film on t he console must be cleaned
using a sponge soaked in hot or cold w at er
and liquid detergent . An abrasive soap pow der
could ruin t he f ilm, scratching it and removing
t he colour.
Never use acids or solvents of any kind
whatsoever; they would damage the film.
The lid of t he
(
B
) in Plexiglas.
should be w ashed
w it h hot or cold w ater toget her w it h liquid.
Do not use metal or rigid plastic brushes or
abrasive metal pads of the kind normally used
in the kitchen.
In attempting to remove stubborn dirt, do
not under any circumstances use blades
or metal tools (knives
– scissors –
screwdrivers
– etc.
) as these could cut
the film.
Soak and soften with hot water and
remove with a sponge or soft cloth.
Never perform the follow ing actions during w ashing
With the front door open and after
dismantling the dasher never wash using
the water jet supplied with the machine or
an external hose pipe jet.
Any water sprayed in could get inside the
machine through the hole (1), and flood all
the equipment.
The only time a jet of water can be used
for washing purposes is when the mixer
turbine is assembled in the freezer tube.
