60
For everyday operation
Switching on and off
>
Use the On/Standby key either on the unit or on the
remote control to switch on the digital receiver.
>
Press the key again to switch the unit off.
>
The unit is now in standby mode, and the current time
is shown on the display.
Programme selection
Using the programme up/down keys
>
Use the programme up/down keys either on the unit
or on the remote control to move up or down the list
by one programme slot at a time.
Using the numeric keys
>
Use the numeric keys to enter the required program-
me number.
For example
1
for programme slot 1
1,
then 4
for programme slot 14
2,
then 3,
then 4
for programme slot 234
When entering programme numnbers with more than one
digit, you have approx. 3 seconds time after pressing a key to
complete the entry.
If you wish to enter a number with only one or two digits, you
can speed up the switching process by keeping your finger
pressed down a little longer on the last digit.
Using the programme list:
>
Press OK.
>
You can now use the up/down arrow keys to mark the
programme you wish to view.
>
Press OK to select the marked programme.
>
Use the up/down arrow keys to move up or down the
list one line at a time.
>
Use the left/right arrow keys to move back or forward
in the list one page at a time.
Volume control
>
You can adjust the volume of your digital receiver by
means of the keys for louder and Volume -
for softer volume.
>
Press the key Sound on/off to switch the sound on or
off (mute function).
Содержание DigiCorder T1
Страница 57: ...57...
Страница 61: ...61 DigiCorder T1...
