is to be carried out.
>
To start the download of updated SFI data manually,
press the
red function key Start now.
If you do not wish to reeceive the additional data, or if you
cannot receive it because of your location, you can switch off
the data receiving function:
>
Switch the item SFI update to off, to disable the data
reception. Only the programme information provided
by the programme providers themselves will now be
available.
If the parameters of the data channel for downloading of the
SFI data should be altered, you can correct them in this
menu. The current transponder data can be obtained from
specialist retailers.In the normal course of events you would
not make any changes to this menu.
9.3 Parental control
Your unit is equipped with an access control function. This
allows you to block key functions (e.g. calling up the main
menu) from unauthorized access. In addition, programmes
and recordings that you have blocked can only be accessed
by means of a four-digit PIN code (unit PIN).
To configure the menu
Parental control
proceed as follows:
>
Press
Menu
to display the
Main Menu.
>
Use the
up/down arrow keys
to mark the line
Settings.
>
Confirm by pressing
OK.
The sub-menu
Settings
will be displayed.
>
Use the
up/down arrow keys
to mark the line
Parental control.
>
Confirm by pressing
OK
.
The menu
Parental control
will be displayed.
(Fig. 9-10)
>
Use the up/down arrow keys to move the marker
around within the menu, and change the individual
positions. When selecting a menu item please note
any additional messages displayed on screen.
9.3.1 Selecting a programme
>
Press
OK.
The Favourites list of the current mode (TV
or Radio) will be displayed. The currently selected pro-
gramme is marked. (Fig. 9-11)
>
Press the
green function key
to switch between the
TV and Radio lists.
>
Press the
red function key
to open a selection win-
dow. Here you have the choice of selecting the des-
ired programme list type.
>
Use the
up/down arrow keys
to select the desired
programme type (e.g. Favourites list).
>
Confirm by pressing
OK
. The programme list selected
will be displayed.
>
Now use the
arrow keys
to mark the programme to
which you wish to block the access.
>
Block the programme by pressing the
yellow function
43
(Fig. 9-10)
(Fig. 9-11)
Содержание DigiCorder T1
Страница 57: ...57...
Страница 61: ...61 DigiCorder T1...
