TechniSat DigiCorder T1, Руководство по эксплуатации

Страница: 32 / 61

Manual timer programming
> Press the Menu key to call up the Main Menu .
> Use the up/down arrow keys to mark the line Timer
organizing .
> Confirm by pressing OK .
The sub-menu Timer organizing will be displayed.
(Fig. 8-1)
> Use the up/down arrow keys to select the type of
timer you wish to programme.
> Press OK . A new window will be displayed, allowing
you to enter the programming data for a new timer
event. (Fig. 8-2)
To prgramme an event proceed as follows:
Source
> Use the arrow keys to mark the column Source .
> Press OK .
> A selection window will be displayed. Use the
up/down arrow keys to select the desired source
(TV or Radio).
> Confirm by pressing OK .
Depending on the previous setting, either the TV or
the radio programme list will now be displayed.
> Use the arrow keys to mark the desired programme.
> Use the up/down arrow keys to move the marker
around the list one line at a time.
> Use the left/right arrow keys to move back-ward or
forward in the list one page at a time.
> Press OK to accept the selected programme into the
timer.
Date
> Use the arrow keys to mark the column Date .
> Use the numeric keys to enter the date (4 digit form)
of the timer event.
Start
> Use t he arrow keys to mark the column Start .
> In this line, use the numeric keys to enter the starting
time for the timer.
Stop
> Repeat the steps as set out under “Start” to enter the
stop, or ending time (except for programme change
timer).
Repeat
> Use the arrow keys to mark the column Rpt .
> Press OK.
A selection window will be opened, showing various
suggestions for repeats.
1x Timer on once
T Daily repeat
1 W Repeat once a week
1-5 Repeat only on workdays
6-7 Repeat only on weekends
> Use the up/down arrow keys to select the desired
32
(Fig. 8-1)
(Fig. 8-2)