TechniSat DigiCorder T1, Руководство по эксплуатации

Страница: 38 / 61

9 Changing basic programming
9.1 Configuring the Favourites list
This chapter describes how you can change the pre-program-
ming of your digital receiver, as well as the Favourites list in
line with your preferences. This function is also required to
sort newly found programmes into the list after a programme
scan.
You should note that your receiver is equipped with two pro-
gramme lists, the Favourites list and the Total list. The
Favourites programme list includes all programmes you have
included in the list, following the procedure described below.
The Total list includes all programmes.
This chapter also describes how programmes can be deleted,
how access can be blocked by means of the parental control
function, and how programmes can be included in the EPG.
When calling up the programme list by means of the
OK key
the Favourites programme list will be displayed.
9.1.1 Calling up programme list management
Proceed as follows to manage the Favourites list:
>
Press the Menu key to call up the Main Menu.
(Fig. 9-1)
> Use the up/down arrow keys to mark the line
Manage TV lists, if you wish to work on the TV list, or
Manage Radio lists, if you wish to work on the Radio
list.
> Confirm by pressing OK.
The programme list management will be displayed,
allowing you to work on either the TV or Radio
Favourites list. (Fig. 9-2)
The Favourites list will be displayed on the right half of
the screen This is active now that the currently selec-
ted programme has been marked. On the left side of
the screen you can see the alphabetically sorted Total
list.
This Total list includes all available programmes.
> Press the red function key to move the marker to the
Total list. This is now active.
> Press the red function key again to open a selection
window. Here you have the choice of sorting the Total
list according to various selection criteria (e.g. all pro-
grammes, only free-to-air, all found, all new, all
English-language, etc.) or you can sort it according to
Providers.
> Use the up/down arrow keys to select the desired
programme listing (e.g. Total list).
> Confirm by pressing OK.
An additional selection window will now be shown.
(Fig. 9-3)
> Now use the up/down arrow keys to select the selec-
tion criterion according to which the Total list is to be
sorted. For instance, choose
All Programmes , to
38
(Fig. 9-1)
(Fig. 9-2)
(Fig. 9-3)