TechniSat DigiCorder T1, Руководство по эксплуатации

Страница: 34 / 61

showing the available timer types.
> Use the up/down arrow keys to select the desired
timer type.
> To accept the timer type into memory, confirm by pres-
sing
OK.
> When you have completed the programming, press
the
yellow function key Accept to accept the data
into memory.
Note!!!
Please ensure that the receiver has stored the current time in
memory. This will by shown on the display when the unit is in
standby mode. If this is not the case, switch your receiver on,
and leave it tuned to a major channel such as ZDF that car-
ries a time signal for approx. 30 seconds, so that the current
time can be stored in memory.
If you have activated this function in terms of Point 6.2.4, the
receiver should now show the current time on the display
while in standby mode.
8.1.3 Timeshift function
The timeshift function provides the opportunity of simultane-
ous recording and playback. This means that you can now
enjoy
timeshift television . Thus, you can view the beginning
of a recording, and decide to skip certain parts, such as
advertising. At the same time the recording of the live signal
continues (see examples below)
34
Example: Timeshift playback
You have missed the start of the Formula 1 race - no problem!
The PVR will show you the race at a later time (timeshift), while continuing to record the event.
Time
Recording
by PVR
Playback
by PVR
14:00 15:00 16:00 17:00 18:00 19:00
Start / Formula 1 / Stop
Start / Formula 1 / Stop
Example: Skipping advertising blocks
SYou would like to view a programme without any irritating interruptions by advertising ?
The PVR allows you to simply skip any advertising blocks recorded.
Time
Recording
by PVR
Playback
by PVR
14:00 15:00 16:00 17:00 18:00 19:00
S Se en n--
d du un ng g
P Prro og grra am mm me e
P Prro og grra a
m mm me e
P Prro o--
g grra am mm me e
P Prro o--
g grra am mm me e
P Prro o--
g grra am m--
m me e
W W W W W W
Advertising break
W W