5-35
EO18-33002A
5. DIAG. TEST OPERATION
(Revision Date: Dec. 20, 2000)
5.3 PARAMETER SETTING MODE
5.3.5.3 Control Code Selection
Power off
Press the [FEED] key.
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1
D I A G .
V 1 . O A
>
< 2
P A R A M E T E R
S E T
>
Press the [PAUSE] key.
Press the [FEED] key four time.
P O
I T I O N
S
Press [PAUSE] key three times.
Printer parameter setting display
C O
E
A U T O
D
P R
N T E R
P A R A
I
Control code selection
AUTO : (Automatic selection)
{ , , } : (Manual selection)
ESC, LF, NUL : (Manual selection)
Select control code with the
[FEED] key or [RESTART]
key. (See NOTE 1.)
Press the [PAUSE] key.
Press the [FEED] key
and [RESTART] key
at the same time.
Continued on Section 5.3.5.4
Pulse motor speed selection.
NOTES:
1.
Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds
enables a fast forward.
2.
A changed control code is stored in memory by pressing the [PAUSE] key.
3.
When “AUTO”, “ESC”, FL, “NUL”, or “
{ , , }
“ is selected, be sure to select the Non-
transmissive ribbon in the ribbon type selection operation.
