5-27
EO18-33002A
5. DIAG. TEST OPERATION
5.3 PARAMETER SETTING MODE
5.3.3.4 Y-Direction Fine Adjustment
Check the point where a line of each color aligns with a black line on theYX-direction test pattern
and enter the obtained adjustment value.
Power off
Press the [FEED] key.
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1
D I A G .
V 1 . O A
>
< 2
P A R A M E T E R
S E T
>
Press the [PAUSE] key.
Press the [FEED] key twice.
P O
I T I O N
S
Press the [FEED] key three times.
P R
N T
C O N D I T I O N
I
H E
D
A D J U S T
A
Press [PAUSE] key.
Y
I R E C T I O N
D
Press [PAUSE] key.
Set the alphabet with the
[FEED] or [RESTART] key.
Press the [FEED] key and
[RESTART] key at same time.
Press the [PAUSE] key.
Press the [PAUSE] key.
B L
C K
B 0 0
A
X and Y-directions fine adjustment
display
Print condition setting display
Skip Black's Y-direction
fine adjustment
Alphabet: A, B, C, or D
Magenta's Y-direction
fine adjustment value
(Number)
Number: 00 to 30
Y-direction fine adjustment display
M A
E N T A
B 0 0
G
Press the [PAUSE] key.
Set the number with the
[FEED] or [RESTART] key.
(See NOTE 1.)
CYAN
YELLOW
Repeat the above
procedure to other
print heads.
Magenta's Y-direction
fine adjustment value
(Number)
M A
E N T A
B 0 0
G
Press the [PAUSE] key twice.
•CB-426
Set the Number with the
[FEED] or [RESRART] key.
See NOTE1
H E
D 2
B 0 0
A
2nd print head
Y-direction fine
adjustment value
(Number)
Alphabet: A, B, C,
or D
2nd print head
Y-direction fine
adjustment value
(Number)
Number: 00 to 30
H E
D 2
B 0 0
A
Press the [PAUSE] key.
•CB-416
Set the alphabet with the
[FEED] or [RESRART] key.
H E
D 1
B 0 0
A
Skip 1st print head
Y-direction fine
adjustment
Press the [PAUSE] key.
NOTES:
1
When setting C or D for alphabet, the range of the number becomes 01 to 29.
2.
This operation allows the max. of
±
4.00 mm change for each color adjustment.
